Abstract

The rise in the utilization of radiation across various domains necessitates the advancement of next-generation radiation shielding materials that are devoid of lead. Due to their low weight and flexibility, polymer composites are considered as environmentally friendly alternative materials that can be used instead of toxic and high-weight lead for radiation shielding. From this point of view, the present study has focused on examining the radiation shielding performance of tantalum pentoxide doped high-density polyethylene (HDPE/Ta2O5) composites (including 5, 10, and 20 wt% Ta2O5) by using WinXCom software and MCNP6 simulation. The photon energies selected corresponded to the photons emitted from the Ba-133 (81 and 356 keV), Cs-137 (662 keV), and Co-60 (1173 and 1332 keV) radioactive sources that cover X-rays along with the low-and mid-energetic gamma-rays. The mass attenuation coefficient (/) of the composites has been calculated within the 81 keV-1332 keV photon range by utilizing WinXCom software and MCNP6 code. The other shielding parameters such as Half Value Layer (HVL), effective atomic number (Zeff), and effective electron density (Neff) have been determined. In the light of data, it has been revealed that gradual increase in Ta2O5 doping while improving the / coefficients, Zeff, and Neff parameters, decreasing the HVL length of HDPE considerably. Additionally, the parameters obtained by WinXCom and MCNP6 simulation are in good agreement. the. Ultimately, the best ionizing shielding performance among the composites has been determined for HDPE/20% Ta2O5 composite against 81 keV photons.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call