Ionizing argon boundary layers. Part 2. Shock-tube side-wall boundary-layer flows

Abstract

A combined experimental and theoretical investigation was conducted on the shock-tube side-wall ionizing boundary-layer induced by a shock wave moving into argon. The dual-wavelength interferometric boundary-layer data were obtained by using a 23 cm diameter Mach—Zehnder interferometer with the 10 × 18 cm Hypervelocity Shock Tube at initial shock Mach numbers of 13 and 16, an initial pressure of 5 torr and a temperature of 300° K. The plasma density and electron number density in the boundary layer were measured and compared with numerical profiles obtained by using an implicit finite-difference scheme for a two-temperature, chemical non-equilibrium, laminar boundary-layer flow in ionizing argon. The analysis included the variations of transport properties based on elastic-scattering cross-sections, effects of chemical reactions, radiation-energy losses and electron-sheath wall boundary conditions. Considering the difficulties involved in such complex plasma flows, satisfactory agreement was obtained between the analyses and experiments. A comparison was made with the flat-plate case and despite the very different velocity boundary conditions at the wall for the two flows the experimental data appear to be quite similar. The experimental bump in the profile of electron number density which was found in the flat-plate case was not found in the side-wall case. Comparisons and discussions of the results for the different types of boundary layer are presented, including a comparison between experimentally derived and analytical plasma-temperature profiles.