Abstract

Exploration of renewable energy, such as solar energy, is imminent not only to cater to the escalating energy demand but also to address the uprising environmental issues due to heavy usage of non-renewable fossil fuel. The dye-sensitized solar cells (DSSCs) which are considered as the third-generation solar cells, have a huge potential to be commercialized due to their low cost, simplicity in fabrication, and promising photon-to-electrical energy conversion efficiency. Nevertheless, a high cell efficiency can only be achieved when an organic solvent is incorporated into the formulation of the electrolyte, which is prone to evaporation and leakage. As a result, DSSCs become unsuitable for long-run usage due to thermal instability in the electrolyte. The early intention of incorporating ionic liquids (ILs) into the electrolyte was to curb the abovementioned problem and to enable the DSSCs to function as a sustainable energy device. As such, this article briefly reviews how ILs have been incorporated into the electrolyte formulation and the extent of how the ILs can affect the cell efficiency in various electrolyte states. The role of the ILs in a range of electrolytes is also highlighted. This sheds light on the true purpose of introducing ILs into DSSC electrolyte, which is to enhance the ionicity of the electrolyte.

Highlights

  • The world population is still heavily reliant on fossil fuel to generate electricity

  • EMII/DMII/AMII-based electrolyte of dye-sensitized solar cells (DSSCs) displayed better power conversion efficiency when compared to single ionic liquids (ILs) (HMII, butyl-3-methylimidazolium iodide (BMII), and propyl-3-methylimidazolium iodide (PMII)), mainly because the mixture had high fluidity and low density

  • ILs with long alkyl chain, 1-dodecyl-3-ethylimidazolium iodide (C12EImI) that physically exists as solid and 1-decyl-3-ethylimidazolium iodide (C10EImI) that exists as a thick liquid, were chosen to be combined with iodine to serve as electrolytes for DSSCs

Read more

Summary

Introduction

The world population is still heavily reliant on fossil fuel to generate electricity. Li et al [24] asserted that the two main processes that lower the cell efficiency are the undesired recombination of the excited electron with triiodide ion, as well as the slow rate in the regeneration of dye particles due to low diffusion coefficient of the redox couple and low ionic conductivity Both of these issues stem from the electrolyte components. EMII/DMII/AMII-based electrolyte of DSSC displayed better power conversion efficiency when compared to single ILs (HMII, BMII, and PMII), mainly because the mixture had high fluidity and low density. The DSSC electrolyte with pyrrolidinium-based IL, namely 1-butyl-1-methylpyrrolidinium iodide (Pyr14), had shown the highest cell efficiency (6.52%) owing to the highest diffusion coefficient and the lowest viscosity, when compared to other cyclic ILs. Tedla and Tai (2018) [35] assessed the stability of DSSCs by using a binary solvent.

Ionic Liquids in Solid or Quasi-Solid Electrolyte for DSSCs
Challenges and Future Directions
Findings
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call