Abstract
Room-temperature ionic liquids (ILs) have been used as external lubricants in polystyrene (PS) and polyamide 6 (PA6)-steel contacts and as internal lubricants in new polymer-IL dispersions. 1−CnH2n+1−3−CH3-imidazolium X− [X=BF4; n=2 (IL1), 6 (IL2), 8 (IL3). X=PF6; n=6 (IL4). X=CF3SO3; n=2 (IL5). X=(4−CH3C6H4SO3); n=2 (IL6)] ionic liquids give low friction and extremely mild wear in PS/AISI 316L stainless steel contacts, independently of IL composition. For AISI 52100 steel pins a tribocorrosion reaction produces FeF2 and increases friction. PS+IL1 (1; 1.35; 3 wt.% IL1) dispersions show lower dry friction and wear against AISI 52100 as IL1 proportion increases, but the lowest friction, with a one order of magnitude reduction with respect to PS, is reached for PS+1%IL1 once the skin layer has been worn out. Increasing IL1 content to 10 wt.% produces an heterogeneous material with non-uniform IL distribution. IL4 reduces friction and wear in PA6+3%IL4 dispersions against AISI 316L, although the lowest values are obtained with IL4 as external lubricant. The cryofracture surfaces of the polymers have been examined and the thermal stability of the polymers in the presence of ILs has been determined.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
