Abstract
A mobility spectrometer was used to characterize gas-phase ions produced from laser ablation of solids in air at 100 degrees C and at ambient pressure with a beam focused to a diameter of <or=0.2 mm at energy of 6 mJ/pulse and wavelength of 266 nm. Metals, organic polymers, glass, graphite, and boron nitride exhibited characteristic mobility spectra with peaks at drift times between 8.75 and 12.5 ms (reduced mobility values of 2.19 to 1.53 cm(2)/Vs). Ion intensities increased initially and then decreased with repeated laser shots through drilling of the solid, and persistence of signal was proportional to hardness. A single comparatively narrow peak for negative ions was observed in mobility spectra for all materials and this was mass-identified as O(2)(-). These ions were formed in air from reactions of oxygen with electrons emitted from the ablation step. Positive ions ablated directly from the solid were masked in ion mobility spectrometry/mass spectrometry (IMS/MS) studies by ionization of moisture and impurities. Positive ions from solids were seen only in the IMS analyzer at elevated temperature and low moisture. Under such conditions, materials were classified from mobility spectra alone with principal component analysis.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
