Ion irradiation combined with nanoindentation as a screening test procedure for irradiation hardening

Abstract

Ion irradiation has long been recognized as a means to efficiently approximate neutron damage in structural materials. Likewise, nanoindentation has long been recognized as a tool to probe the mechanical behaviour of thin layers. The combination of both techniques in order to establish a screening test procedure for the resistance of ferritic/martensitic (f/m) steels to neutron damage in terms of hardening requires consideration of a number of details. The objective is to specify one among several possible variants of such a screening test. Important constituents of the approach include: (1) the design of the ion irradiation experiments, e.g. using the Monte Carlo binary collision code SRIM, (2) nanoindentation testing over a large range of indentation depths, and (3) proper consideration of the indentation size effect, the substrate effect and the pile-up effect. An elastic-modulus-based correction of the contact area was rationalized. A version of the overall approach sketched above was applied to unirradiated, self-ion-irradiated and neutron-irradiated samples of the 9% Cr f/m steel T91. Apparently, this is the first direct comparison of nanoindentation results obtained for samples of the same f/m steel irradiated with ions and neutrons at the same temperature (200 °C) and up to about the same fluence (2.5 dpa versus 2.31 dpa). The findings indicate that the indentation hardness increase is significant and agrees within the range of errors.