Ion Implantation Doping in Silicon Carbide and Gallium Nitride Electronic Devices

Abstract

Wide band gap semiconductors such as silicon carbide (SiC) and gallium nitride (GaN) are excellent materials for the next generation of high-power and high-frequency electronic devices. In fact, their wide band gap (>3 eV) and high critical electric field (>2 MV/cm) enable superior performances to be obtained with respect to the traditional silicon devices. Hence, today, a variety of diodes and transistors based on SiC and GaN are already available in the market. For the fabrication of these electronic devices, selective doping is required to create either n-type or p-type regions with different functionalities and at different doping levels (typically in the range 1016–1020 cm−3). In this context, due to the low diffusion coefficient of the typical dopant species in SiC, and to the relatively low decomposition temperature of GaN (about 900 °C), ion implantation is the only practical way to achieve selective doping in these materials. In this paper, the main issues related to ion implantation doping technology for SiC and GaN electronic devices are briefly reviewed. In particular, some specific literature case studies are illustrated to describe the impact of the ion implantation doping conditions (annealing temperature, electrical activation and doping profiles, surface morphology, creation of interface states, etc.) on the electrical parameters of power devices. Similarities and differences in the application of ion implantation doping technology in the two materials are highlighted in this paper.