Ion implantation and thermal annealing of α-Al2O3 single crystals

Abstract

The effects of ion implantation and post-implantation thermal annealing of α-Al2O3 have been characterized using ion scattering-channeling techniques, and correlated with electron paramagnetic resonance (EPR) and microhardness measurements. Although most of the work was done on 52Cr implanted specimens, preliminary results have been obtained also for implanted 90Zr and 48Ti. For Cr implantation, the Al2O3 lattice damage saturates at relatively low doses, but the near-surface region never becomes amorphous. A preferential annealing behavior begins in the Al sublattice after ∼800 °C annealing, and in the oxygen sublattice, only after 1000 °C annealing. Lattice location measurements show that after annealing to 1500 °C, Cr is greater than 95% substitutional in the Al sublattice. Above 1500 °C, implanted Cr atoms redistribute by substitutional diffusion processes. EPR measurements show that part, if not all, of the implanted Cr is trivalent and substitutional after annealing to 1600 °C. Microhardness measurements are consistent with alloy formation in the process of ion implantation followed by thermal annealing.