Ion beam irradiation of lanthanum and thorium-doped yttrium titanates

Abstract

Y2Ti2O7 pyrochlores doped with La have been sintered at 1373K for 12h with the designed compositions of the (LaxY1−x)2Ti2O7 system (x=0, 0.08, 0.5, and 1), and the phase compositions were analyzed by X-ray diffraction. Limited amounts of La were incorporated into yttrium titanate pyrochlore structure for La-doped samples; while, the end member composition of La2Ti2O7 formed a layered perovskite structure. Ion beam-induced amorphization occurred for all compositions in the (LaxY1−x)2Ti2O7 binary under 1MeV Kr2+ irradiation at room temperature, and the critical amorphization dose decreased with increasing amounts of La3+. The critical amorphization temperatures for Y2Ti2O7, (La0.162Y0.838)2Ti2O7 and La2Ti2O7 were determined to be ∼780, 890 and 920K, respectively. Th4+ and Fe3+-doped yttrium titanate pyrochlores were synthesized at 1373K by sintering Y2Ti2O7 with (ThO2+Fe2O3). Pyrochlore structures and the chemical compositions were primarily identified by the X-ray diffraction and energy dispersive X-ray (EDX) measurements. The lattice parameter and the critical amorphization dose (1MeV Kr2+ at room temperature) increase for yttrium titanate pyrochlores with the addition of Th. The increasing ‘resistance’ to amorphization with less La and greater Th and Fe contents for (Y1−xLax)2Ti2O7 and Y2Ti2O7–Fe2O3–ThO2 systems, respectively, are consistent with the changes in the average ionic radius ratio at the A-sites and B-sites. These results suggest that the addition of lanthanides and actinides (e.g., Th, U, or Pu) will affect the structural stability, as well as the radiation response behavior of the pyrochlore structure-type.