Iodine and disinfection: theoretical study on mode of action, efficiency, stability, and analytical aspects in the aqueous system.

Abstract

Although they have been in use for nearly 170 years, the mode of action of iodine-based disinfectants is not yet clearly understood, as is manifested, for example, in diverging judgements about the relevance of the individual iodine species. Although studies based on calculated equilibrium concentrations in pure iodine solutions have already been done, there is a lack of knowledge about iodine solutions in the presence of additional iodide which would be of intrinsic importance for disinfection practice. Therefore, a re-calculation was undertaken considering variations of this parameter in the pH range 0-14. The presented calculations concern fresh iodine solutions not affected by disproportionation (iodate formation) and provide information about the equilibrium concentrations of the species I, I2, I3, I5-, I6(2-), HOI, O1-, HI2O-, IO2- and H2OI+. Additional iodide and the pH value have a very pronounced influence on the individual equilibrium concentrations (several powers of ten); hence, conditions can be indicated where the number of species of virtual importance is drastically reduced. In the most common case with iodine in the presence of additional iodide at pH < 6, only I-, I2 and I3- play a role. In the absence of additional iodide, at pH 8-9 and at high dilution (c(I2) < 10(-5) M), on the other hand, HOI accounts for over 90% of the oxidation capacity. At high iodide concentration (e.g., Lugol's solution) the species I5- and I6(2-) make up 8.2% of the oxidation capacity. The iodine cation H2OI+, frequently quoted as an active agent in disinfection, is without any relevance under the conditions occurring in practice, as are IO- and HI2O- which become important only at pH > 10. The stability problem (i.e. rate of iodate formation) arising at pH > 6 can be reduced to hypoiodous acid, as manifested in the simple rate law d[IO3]/dt = 0.25 [HOI]3/[H+] which allows an estimation of stability under weakly alkaline conditions. The results of this study allow us to deduce general qualities of aqueous iodine solutions, such as reactivity, stability, and analytical aspects, and to estimate major disinfection-orientated properties such as microbicidal activity, irritation, and incorporation effects. Though the calculations consider primarily preparations devoid of polymeric organic compounds capable of complexing iodine species, the results can be largely transferred to iodophoric preparations.