Abstract
Printable Electrochemistry has attracted attention for the development field of a disposable biosensor and biofuel cell. A printable paper-based biofuel cell (PBFC) is useful for energy harvesting power sources in the Internet of Things (IoT) field [1-3]. In addition, PBFC is suitable for an application as a self-powered wearable sensor. In the present study, I introduce two paper-based wearable biofuel cells fabricated by screen-printing technique (Fig. 1). One is used as a self-powered diaper sensor (right side in Fig. 1). The biofuel cell can generate electric power from glucose in urine. The maximum output power increase along with increase of glucose concentration. Thus, we can monitor the glucose concentration by measuring the maximum output power. The paper-based biofuel cell exhibited a maximum power density of 0.7 mW in 100 mM glucose solution. Our group also developed an adhesive bandage-type biofuel cell, which get a power from lactate in sweat (left side in Fig. 1). In the present study, we discuss the characteristics of the wearable biofuel cells in detail. Acknowledgement This work was supported by JST-ASTEP Grant Number AS272S004a.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.