(Invited) Overview of Ion-Conducting Polymer Membranes and Membrane Separators for Water Electrolysis

Abstract

Traditional liquid alkaline electrolyzer uses a porous diaphragm to allow diffusion of hydroxide ion from a feed of concentrated KOH solution while separating anode and cathode and suppressing mixing of produced H2 and O2 gases. Although liquid alkaline electrolyzer is considered as a matured technology, recent renaissance of new electrode separators suggests there is significant potential for improvement in efficiency and cost reduction by lowering area specific resistance and increasing operation current density.Ion-conducting polymers (e.g., proton or hydroxide) are used as a key component of polymer electrolyte membranes, such as acidic proton exchange membrane (PEM) and alkaline anion exchange membrane (AEM), in electrochemical energy conversion and storage technologies including water electrolyzers. For example, the state-of-the-art PEM electrolyzers have used Nafion for a PEM and ionomer catalyst binder for decades, though it is not ideal proton-conducting membrane material for those applications. Recent pressure on perfluoroalkyl substrates (PFASs) from government and environmental activist groups due to their environmental and health hazard has attracted the development of alternative polymer electrolyte membranes based on hydrocarbon polymers within electrochemical society. Compared to perfluorosulfonated Nafion, hydrocarbon ion-conducting polymers (both PEMs and AEMs) can offer advantages of flexible synthetic tunability, lower gas permeability, and importantly lower production cost.In this tutorial, an overview of recent progress in the development of advanced porous membrane separators, PEMs and AEMs, their key membrane properties, and the state-of-the-art performance in applications of water electrolyzers will be discussed. Figure 1