Abstract
TiNiCo alloy is a smart material that can recover its original shape when the temperature is increased or decreased. Due to its unique class of properties, such kinds of materials are used in various industrial applications such as robotics, biomedical and aerospace industries. Conventional machining of these alloys is quite difficult hence non-conventional machining process are found to be more suitable for machining of these alloys. Wire sparks discharge machining process was chosen for the machining of Ti 50 Ni 49 Co 1 and Ti 50 Ni 45 Co 5 alloys. Pulse on the duration and servo voltage was selected as machining process parameters with their five levels and metal removal rate considered as machining response. The error analysis has been carried out through a comparison between experimental values and predicted values. An artificial neural network (ANN) was used as the prediction technique. Predicted values were found to be close to experimental values. 6% error for Ti 50 Ni 49 Co 1 and 5% error have been found in Ti 50 Ni 45 Co 5 alloy.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.