Abstract
7000 series aluminium alloys have greater strength than conventional aluminium alloys used in the automotive industry, but little has been reported on their formability. In this paper the strength and formability of age-hardenable AW-7020 alloy sheet in the T6 temper condition was investigated at temperatures between 150 and 250°C by warm tensile, Swift-cupping and cross-die deep-drawing tests. Differential scanning calorimetry (DSC) investigations were carried out to study the precipitation state of AW-7020 sheet in as-received, warm cross-die deep-drawn and post-paint-baked conditions. Formability was found to improve at temperatures above 150°C and was sensitive to temperature and strain rate. There was also an onset of dynamic recovery from 150°C. DSC results showed the presence of η′ precipitates in T6 temper and that these coarsen during the warm cross-die deep-drawing and paint baking processes with ∼30% drop in ultimate tensile and yield strengths. Dynamic recovery and coarsening of η′ precipitates were found to contribute to the increase in formability at elevated temperatures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
