Abstract
Results from gas probing with various analyte vapors on high-Q low-loss surface transverse wave (STW) and surface acoustic wave (SAW) resonators coated with thin plasma-polymer films of hexamethyldisiloxane (HMDSO), styrene, and allyl alcohol at different polymerization conditions are presented in this paper. At the same acoustic wavelength of 7.22 /spl mu/m and identical film thicknesses, HMDSO-coated STW devices feature substantially higher relative sensitivities to all analytes compared to their SAW counterparts. When operated in a microwave oscillator loop, plasma-poly-styrene and allyl-alcohol-coated STW devices generate strong sensor signals, even at low analyte concentrations, retaining an oscillator short-term stability in the 1/spl times/10/sup -9//s to 1/spl times/10/sup -8//s range. A 250 kHz sensor signal with 7/spl times/10/sup -9//s stability was obtained from a styrene coated 700 MHz STW resonator oscillator at a 1400 parts per million concentration of xylene vapor, which results in a measurement resolution of less than 40 parts per billion for xylene in the ambient air. It is shown that, with respect to sensitivity and stability over long probing periods, plasma-polymer films may become a serious competitor to the more or less unstable soft polymer coatings currently used in SAW-based gas sensors for applications in wireless systems for environmental control and protection.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Microwave Theory and Techniques
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
