Abstract
ABSTRACTAdvanced AlCrSiN and AlTiSiN coatings were deposited on high-speed steel by cathodic vacuum arc. The microstructures, mechanical and tribological properties were studied, as well as cutting performance. The results show that multilayered AlCrSiN coating mainly consists of nanocrystalline fcc-AlCrN and a few amorphous Si3N4 phases, with an average module period of about 6.0 nm. While the AlTiSiN coating reveals nano-composite structure consisted of nanocrystalline fcc-AlTiN and hcp-AlN embedded into Si3N4 amorphous matrix. The AlCrSiN-coated tool reveals a more excellent cutting performance when compared with the AlTiSiN-coated tool due to its higher hardness, adhesion strength, H3/E*2 ratio and wear resistance when compared with the AlTiSiN coating.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have