Abstract

Aluminium 6082-T6 is a structural alloy having high strength has seen replacing 6061 alloy in engineering applications. During manufacturing process geometric discontinuities are inevitable. The presence of notch in the component is more dangerous. In this paper, the influence of notch length on miniature fracture characteristics of aluminium 6082-T6 alloy has been studied. Experiment was carried in accordance with ASTM standard and specimens were tested by varying the notch length within the specified constraint. Single edge notch bending test was performed on each of specimens under mode-I condition. Results showed that the specimen with minimum notch length has high crack tip initial instability, further increase in the notch length leads to decrease the load carrying capacity, extended portion of crack length and nature of fracture. On experimental observation, plastic zone size near the end of the cut is majorly dependent on notch length of the specimen. The fractured surface analysis also carried on selected specimen with the help of scanning electron microscope. Overall results shows that crack growth and crack propagation vary as a function of notch length and is different in each of the specimens.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call