Abstract
High-resolution solid-state 27Al and 31P MAS NMR has been used to investigate the nature of aluminium- and phosphorus-containing solids formed during wastewater treatment. Although difficult to characterize by conventional techniques, these amorphous solids can be characterized by MAS NMR, providing information about their short-range ordering. In the present study, most of the solids were precipitated under conditions of high alkalinity, similar to those encountered during wastewater treatment. The ageing time of the aluminum hydroxide prior to the addition of phosphate (t1), the ageing time of the aluminum hydroxyphosphates after the addition of phosphate (t2), and the phosphorus to aluminum molar ratio were controlled while the effects of changing the parameters were examined. It was found that the aluminum MAS NMR chemical shift was related to the amount of phosphate present in the solid, which in turn was related to t1, t2, and the P:Al molar ratio. The results also lend support to the hypothesis that phosphate removal occurs through an adsorption process onto amorphous aluminum hydroxide, rather than through direct precipitation of aluminum phosphate. The increased understanding of aluminum and phosphate chemistry and the species formed during wastewater treatment will be useful in optimizing wastewater treatment processes. Keywords: aluminum, phosphate, NMR, activated sludge, wastewater treatment.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.