Abstract
In this work, the liquid thermal conductivities of Decamethylcyclopentasiloxane (D5) and Decamethyltetrasiloxane (MD2M) were measured by using the transient hot wire method. The measurement was conducted in the temperature range of 253.15 K to 353.15 K and pressures ranging from 0.1 MPa to 8.0 MPa, with an uncertainty of 3.0 % in the present measurements. Besides, an empirical correlation was used to represent the experimental data. The Average Absolute Deviation (AAD) between the experimental data and calculations for D5 and MD2M are 0.34 % and 0.31 %, respectively. This study provides accurate liquid thermal conductivities of D5 and MD2M. The present experimental thermal conductivity data are useful for the design and optimization of the relevant heat exchange system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
