Investigation on the use of a novel regenerative flow turbine in a micro-scale Organic Rankine Cycle unit

Abstract

Reliable and low-cost expanders are fundamental for the competitiveness of small-scale Organic Rankine Cycle (ORC) plants using low-temperature heat sources. Regenerative flow turbines (RFTs) can be considered a low-cost and viable alternative expander, yet their performance needs to be fully investigated. Therefore, the use of an RFT in a micro-scale ORC test bench is investigated in this work through a modelling study. Specifically, three-dimensional CFD simulations are carried out to assess the performance of the considered expander with varying operating conditions and a numerical model of a non-regenerative, small-scale ORC system is developed to investigate its potential in waste heat recovery (WHR) applications.Using R245fa as the working fluid, the CFD analysis shows that the expander achieves a maximum total-to-static isentropic efficiency of about 44% in the investigated operating range. The small-scale ORC system has a net output power in the range 100–600 W and a net cycle efficiency of 1–2.3%. Moreover, a comparison with two scroll expanders having different built-in volume ratios shows that the RFT operates with higher isentropic efficiencies in low mass flow rates and pressure ratios thus highlighting its suitability for low-temperature WHR applications, especially when considerable fluctuations of the heat source are expected.