Abstract
In this work, the diamond films with 150 mm in diameter were prepared in our home-made 915 MHz microwave plasma chemical vapor deposition (MPCVD) system. The appropriate height of the pocketed substrate holder was researched in order to reduce the edge effect as much as possible. And the diamond thin films which were deposited in the designed substrate holder present relative high uniformity which demonstrated the feasibility of the structure of the substrate holder. Furthermore, the φ 150 mm diamond thick film was deposited using relative higher gas mixture flow rate and microwave power. The thickness variation of the diamond thick film is about 13.4% and the full width at half maximum (FWHM) of the diamond peak increases from 5.78 cm−1 to 7.23 cm−1 with the distance to the center of the diamond film increasing from 0 mm to 70 mm. The I(C2)/I(Hα) across the plasma shows a relative uniform distribution which was kept in the range of 2.9–3.4 in our experiments. Besides that, the φ 200 mm diamond film was attempt to synthesis which illustrates the feasibility of depositing the diamond films with the diameter more than 150 mm, although some improvements on the plasma environment should be considered.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.