Abstract
The effect of carbon content on the morphology of martensite in carbon steels has been studied in depth. It is found that not all the packet martensites obtained in carbon steels quenched from elevated temperature are lath martensite. The packet martensite obtained thus should be divided into two categories: packet thin plate martensite (i. e. lath martensite) and packet plate martensite. The former is only found in low carbon steels, the latter mainly in medium and high carbon steels. The morphology of martensite in steels with different carbon contents has been researched in detail using optical microscopy, SEM and TEM. A new criterion is proposed for identifying the category of martensite. Based on this new criterion, it is found that as-quenched steels withC c⩽0.2% contains lath martensite; that with 0.2%<C c<0.4% contains a mixture of lath and plate martensite. The structure of as-quenched steels withC c⩾0.4% is completely of plate martensite. The curve of the relative volume percentage of martensite without internal twins versus carbon content has been redetermined. Finally, the misinterpretation of experimental results by previous investigators is analysed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.