Investigation on the Mechanisms of Nitrogen Shallow Implantation Influence on Trap Properties of SiO2/n-Type 4H-SiC Interface

Abstract

Silicon carbide (SiC) is the only wide-bandgap semiconductor capable of forming native dielectric layer of SiO2 by thermal oxidation. This unique property of SiC combined with its high thermal conductivity and high critical eld makes this semiconductor material suitable for high power electronic devices. Unfortunately, the state-of-the art technology does not use the full bene ts of the material, especially in the case of MOSFET transistors. This is caused by insu cient electrical parameters of SiO2/SiC interface. Two-component structure of the material and its high density result in high level of interface traps reducing the surface mobility and thus increasing series resistance of the device. One of the proposed methods of reducing the trap density in SiC MOS structure is a shallow nitrogen implantation prior to oxidation. This technique is based on the observation that introducing nitrogen into the SiO2/SiC system results in signi cant reduction of trap states density and increase of the channel e ective mobility. The shallow implantation technique has been reported to be as much e ective as nitric oxide annealing which is one of the most e ective techniques for oxide quality improvement in case of SiC. Unlike the di usion based techniques, like postoxidation annealing, implantation of the nitrogen prior oxidation has the possibility of nitrogen concentration control near the oxide interface during oxidation process itself. This property is important since it was shown that the improvement degree is directly proportional to amount of nitrogen built in the vicinity of SiO2/SiC interface during oxidation. However, previous investigations about this technique were inconclusive about the in uence of implantation parameters and process conditions on observed e ects. Both improvement and deterioration of interface quality was observed by di erent researchers. This behavior was never explained clearly. The primary objective of this research is to analyze the impact of implantation conditions on electrical properties of SiO2/SiC MOS structure. This analysis is used to evaluate a hypothetical description of physical phenomena during oxidation of shallowly implanted substrates.