Abstract
In order to improve the wear resistance and oxidation behaviors of Ti – 6Al – 4V alloy, the sputter-deposited nanocrystalline Cr3Si film was prepared on Ti – 6Al – 4V alloy substrate by double cathode glow discharge. The nanocrystalline film was characterized by using a variety of analytical techniques, such as XRD, SEM, TEM, scratch tester, nanoindentation and Vickers microhardness tester. The phase analysis results showed that the sputter-deposited Cr3Si film (thickness 8µm) was comprised of equiaxed nanocrystalline Cr3Si with a grain size of less than 5 nm. The nanohardness of the nanocrystalline Cr3Si was 2.37 times higher than that of coarse-grained Cr3Si, whereas the elastic modulus of nanocrystalline Cr3Si was approaching to that of coarse-grained Cr3Si. The critical load value obtained by scratch testing of the nanocrystalline Cr3Si film on Ti – 6Al – 4V alloy substrate was 80N, confirming that the nanocrystalline Cr3Si film was well adhered to Ti – 6Al – 4V alloy substrates. Results of cyclic oxidation testing at 700°C and 800°C in air showed that the oxidation kinetic curves of the nanocrystalline Cr3Si film obeyed a parabolic rate law, and oxide scale was mainly comprised of Cr2O3 and amorphous SiO2 with the thickness of < 1µm that could effectively retard the diffusion of oxygen into the nanocrystalline Cr3Si film. The dry wear test results showed that specific wear rate of nanocrystalline Cr3Si film was two order magnitude smaller than that of Ti – 6Al – 4V alloy at RT and 500°C. Keywords: Nanocrystalline Cr3Si, sputter-deposited, high temperature oxidation, wear resistance
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
