Abstract

In this study, the ballistic behavior of protective armor plates (PaP) obtained by curing between high structural strength AA7075-T651 aluminum plates by reinforcing with glass balls of two different rubber mixtures whose damping properties were developed with carbon nanotube and glass bubbles fillers were investigated. A total of six PaPs at 27, 30, and 35 mm heights were prepared using two different matrix damping rubbers. High-strength liner rubber used in air bellows is vulcanized on the front and back surfaces of PaPs. Between the PaPs, Ø15.875 and Ø6.747 mm, borosilicate glass balls were placed in a particular arrangement that coincides with the middle of the matrix rubber and does not have any gaps. Liner rubber cured on the front face has managed to hold the energy by forming a layer like clothing around the bullet cores. Glass balls between PAPs play an essential role in the energy absorption of GB-filled mixtures. In contrast, in MWCNT-filled mixtures, they act as a second damping element. The ballistic performance of PAPs prepared with multiwalled carbon nanotubes was determined to be better than those prepared with Glass Bubbles. Thanks to the superior mechanical properties and high aspect ratio of MWCNTs, the penetration and swelling heights of the matrix damping rubbers prepared to have excellent results compared to glass bubbles. With the increase in the thickness of the PaPs prepared with MWCNTs, the deformation effect of the penetration depth and bulging height created by the bullet on the anterior and posterior surfaces decreased. As the thickness of PaP increased from 27 mm to 35 mm, penetration depth decreased by 38%, and bulging height reduced by 35%. The amount of penetration and swelling increased in PaPs using rubber filled with glass bubbles. As the plate thickness increased, the damping feature decreased and the glass balls were activated, and the bullet was stopped.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call