Abstract
Nb-Ti-ZrB2 metal matrix ceramic composites with a fixed atomic ratio Nb/Ti = 2/1 and ZrB2 volume fraction changing from 0, 11 vol%, 23 vol% to 36 vol% were hot pressed at 1600 °C under 30 MPa. The influence of ZrB2 content and Ti addition on the phase constitution, microstructure evolution, toughening mechanisms and strengthening mechanisms were investigated. It was shown that the formation of in situ Nb-rich (Ti,Nb)B and Ti-rich (Nb,Ti)B was attributed to a high mutual solubility of monoborides and the amount of niobium and titanium borides increased with increasing ZrB2 content. The needle-shaped (Ti,Nb)B phase weakened the damage to fracture toughness caused by ZrB2 particle fracture due to crack bridging, crack defection and the pull-out toughening mechanisms. The highest fracture toughness of the Nb-Ti-ZrB2 composites was 12.0 MPa·m1/2. The stiff (Nb,Ti)B phase acted as a strong obstacle to the dislocation motion, leading to dislocation pile-up and enhancing the strength of the Nb-Ti-ZrB2 composites during compression tests. However, stress concentration around the needle-shaped (Ti,Nb)B phase easily leads to crack initiation and extension, resulting in decreased strength. The yield strength of Nb-Ti-ZrB2 composites ranged from 657.3 MPa to 1783.0 MPa owing to the combined influence of the strenghening mechanism caused by (Nb,Ti)B and the weakening mechanism caused by (Ti,Nb)B. The compressive deformation and failure process were also discussed in detail in this study.
Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
