Investigation on sol–gel silica coatings for the protection of ancient glass: Interaction with glass surface and protection efficiency

Abstract

To hinder the phenomenon of weathering of ancient stained glass, the present work proposes the application of sol–gel coatings to the glass surface. Previous investigations [1–6], in fact, show that sol–gel silica coatings do not change the appearance of artistic glasses when deposited on their surface. Moreover, the film thickness is so small (around 200 nm) and its composition and structure so compatible with that of the original glass, that the characteristics of the coating and original glass are not distinguishable. In this work, several recipes used to produce sol–gel coatings have been tested in order to understand their behavior when adopted for covering ancient weathered glass. The coatings are made of sol–gel silica prepared with two different catalysts: H +, Pb 2+ and without catalyst. All the investigated samples show a good adhesion of the coating to the glasses used to simulate the behavior of ancient artefacts. The sol–gel silica coatings have been studied before and after accelerated ageing to test the resistance of the protective coatings to weathering. Another important index to test of the efficiency of the sol–gel coatings for the protection of an ancient glass is the lead ion mobility. In ancient stained glass, in fact, this element is present in the metallic lead network, in the grisaille paintings and constitutes a main component of many glass tesserae. The action of water on this highly mobile ion involves the degradation of the glass itself and the release of the ion in the rain solution. Ageing tests show the efficiency of H + and Pb 2+ catalyzed coatings and the inefficiency of the non-catalyzed sol–gel layers.