Investigation on power electronics topologies for inductive power transfer (IPT) systems in high power low voltage applications

Abstract

In this contribution the optimal power electronics topology in SS-compensated IPT systems for Electric Vehicles (EVs) is investigated in terms of required rated semiconductor power and efficiency. The novelty of this paper is the focus on high power (> 1 kW) and low output voltage (<100 V) applications. It is shown that the required semiconductor power which can be assumed to be proportional to the chipsize and thus the costs of a semiconductor device is roughly 10% lower for the topology with primary DC/DC conversion than with secondary DC/DC conversion. Furthermore it is found that the topology with primary DC/DC conversion shows the highest overall efficiency, while the topology with secondary DC/DC conversion results in a better worst case efficiency. A general rule can be derived that the winding ratio for both topologies should be chosen as high as possible.