Abstract
Rock fractures as the main flow channels, their morphological features, and spatial characteristics deeply influence the seepage behavior. Reservoir sandstones as a case study, four splitting groups of fractures with different roughness were scanned to get the geometric features, and then the seepage experiments were taken to analyze the relationship of the pressure gradient ∇ P and flow rate Q , and the critical Reynolds number( Re c ) and wall friction factor ( f ) were determined to explain the translation of linear seepage to nonlinear seepage condition. Based on the scanning cloud data of different rough fractures, the fractures were reconstructed and introduced into the COMSOL Multiphysics software; a 3-dimensional seepage model for rough fractures was calibrated and simulated the seepage process and corresponding pressure distribution, and explained the asymmetry of flow velocity. And also, the seepage characteristics were researched considering aperture variation of different sample fractures; the results indicated that increasing aperture for same fracture decreased the relative roughness, the fitting coefficients by Forchheimer formula based on the data ∇ P ~ Q decreased, and the figures about the coefficients and corresponding aperture described nonlinear condition of the above rough fractures. In addition, the expression of wall friction factor was derived, and relationship of f , Re , and relative roughness indicated that f increased with increasing fracture roughness considering the same aperture, resulting in nonlinear flow more easily, otherwise is not, showing that f could be used to describe the seepage condition and corresponding turning point. Finally, it can be seen from the numerical results that the nonlinearity of fluid flow is mainly caused by the formation of eddies at fracture intersections and the critical pressure gradient decreases with increasing angle. And also, analysis about the coefficient B in the Forchheimer law corresponding to fracture intersections considering the intersecting angle and surface roughness is proposed to reveal the flow nonlinearity. The above investigations give the theoretical support to understand and reveal the seepage mechanism of the rock rough fractures.
Highlights
Rock fractures are common in the field of the rock engineering
The main conclusions are drawn as follows: (1) The flow tests through the rough fractures of specimens S1-S4 show that increasing pressure gradient can enlarge the flow velocity and weaken the viscous forces, and increasing inertial forces cause the transformation of the seepage behavior from the linearity to nonlinearity
(2) The 3-D fractures are reconstructed based on the scanning point cloud data, and the seepage numerical model using the Navier-Stokes equation based on the software COMSOL Multiphysics is proposed considering different roughness about four specimens S1S4
Summary
Rock fractures are common in the field of the rock engineering. And the fractures as the controlled seepage channels play an important role on the groundwater assessment, oil and gas development, and mass transportation; how to solve the flow behavior through the complex fractures is key to above engineering [1]. Numerical simulations based on the experiments and theories have been developed for complex flow behavior through the rough fractures. Wang et al [16] and Zou et al [17] have proposed some numerical models based on Boltzmann and Fluent software to analyze the flow nonlinearity in the rough fractures. Many studies described have been conducted experimentally and numerically, the influence mechanisms of fracture intersection angle and roughness on fluid flow behavior are rarely discussed. Many studies described were conducted experimentally, theoretically, and numerically, the flow through 3dimensional rough fractures considering the space distribution has not been deeply investigated. Flow tests have been conducted on these fracture models and the corresponding numerical simulations have been carried out by solving the Navier-Stokes equations based on software. The achievements can help to verify all kinds of seepage theories, especially promoting the general application in corresponding engineering
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
