Abstract

Alumina (Al2O3) ceramic particles are potentially attractive as reinforcement for Cu-based composites, owing to their excellent thermodynamic stability. In this paper, Cu–2.75vol.% Al2O3 composites were prepared by a novel in-situ reactive synthesis. The microstructures of Cu–2.75vol.% Al2O3 composites were characterized by XRD, SEM and TEM, respectively. The results showed that the nano-scale γ-Al2O3 particles with a mean size of 10–20nm in diameter are uniformly distributed in the Cu matrix. High resolution transmission electron microscopy (HRTEM) analysis shows that there is a crystallographic orientation relational of 202̅Cu//26̅0γ‐Al2O3 and [111]Cu//[001]γ‐Al2O3, indicating that the cubic γ-Al2O3 phase is coherent with Cu matrix. Particularly, the obtained composites possess superior mechanical properties. And the tensile strength, the yield strength, the Rockwell hardness and the electrical conductivity are 570MPa, 533MPa, 86HRB and 85% IACS, respectively. The strengthening mechanisms, mainly consist of grain-boundary strengthening and Orowan strengthening, could be used to illustrate the improvement on the strength of the Cu–Al2O3 composites.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.