Abstract
Abstract: The 3D flow field generated by a dual-impeller in the agitation of glycerin fluid was simulated using the commercial CFD package. The flow was modeled as laminar and a multiple reference frame (MRF) approach was used to solve the discretized equations of motion. The velocity profiles with a dual-impeller rotating at constant speed of 200r/min and at different layer clearances were obtained. By analysis to their axial and radial velocity vector plots and velocity distribution curves, it is found that the velocity distributions of the dual 6-bladed radial disc turbines (2-6DT) are better when the clearance is bigger or equal to the T/2, accompanied with the flow field pattern of parallel flow. Moreover,when the clearance is smaller or equal to the T/3, there are more advantages for 6-bladed radial disc turbines + pitch 4-bladed turbines (6DT+PTB) than other combinations,followed by the flow field pattern of connected flow.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.