Abstract
Different amounts of Y2O3 were incorporated into CaO through a sol–gel combustion method and compared with two naturally occurring sorbent and CaO derived from calcium acetate on CO2 capture performance. XRD, SEM, TEM and N2 adsorption results revealed that homogeneously dispersed Y2O3 nanoparticles notably improved the sorbent morphology, and therefore the capture performance. The carbonation rate in the fast stage was greatly enhanced via Y2O3 addition and a linear relationship was established between the maximum carbonation rate and the volume of pores with diameters less than 220nm. The sorbent containing 20wt% Y2O3 presented excellent cyclic CO2 capture capacity as well as stability. After 10 cycles it absorbed 0.57g CO2/g sorbent under mild conditions and still 0.49g CO2/g sorbent under realistic conditions, respectively. Finally, calcination conditions significantly influenced the sorption performance and sorbent structure. Combined with pore size distribution measurement, enhanced sintering and reactivation, two counteractive roles brought by CO2 addition during calcination, were elucidated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.