Abstract
A grey-based Taguchi method was applied to investigate the optimal operating conditions in shielded metal arc welding (SMAW) to join SS316 and ASTM A36. This work aims to set optimal parameters for the mechanical properties of the weld joint. The effects of various welding factors on electrode type, welding current, arc welding, and welding speed have to be characterized and optimized to achieve an optimum condition. An L9 orthogonal array was used to group the various components. The mechanical properties of a dissimilar weld joints were described through hardness, tensile and flexural strength tests. The optimum welding parameters were obtained simultaneously as an electrode type E309, a welding current of 100 A, an arc voltage of 14 V, and a welding speed of 4 cm/min, which predicted improve 23.0% in its performance.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
