Year-end Sale % OFF 
Abstract
Ceramic-WC coatings were prepared on AZ31 B Mg alloy by plasma electrolytic oxidation (PEO) from a phosphate based bath containing suspended tungsten carbide nanoparticles at various process times. Scanning electron microscope results indicated that increase of coating time and incorporation of tungsten carbide into the ceramic coating during the PEO process led to a decrease in the number and diameter of coating pores. Phase analysis showed that the nanocomposite coating was composed of MgO, Mg3(PO4)2 and WC. Tribological properties and corrosion behaviour of uncoated AZ31 B Mg alloy and ceramic coatings were evaluated using a pin-on-disc tribometer and potentiodynamic polarisation technique in 3.5% NaCl solution, respectively. The wear and electrochemical tests showed that wear and corrosion resistance of ceramic-WC nanocomposite coatings were better than ceramic only ones. In addition, wear and corrosion behaviour of coatings improved with increasing the coating time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
