Abstract
Abstract This paper proposes a netlike energy director (ED) made of carbon fiber-reinforced thermoplastic (CFRP) composites for ultrasonic welding. To explore the benefits of using netlike EDs, the joint qualities with flat EDs and without EDs are included for references. The influence of the netlike ED geometry on weld attributes and joint quality are investigated in terms of joint cross-sectional microstructure, fracture morphology, and maximum shear load. It is found that for both netlike and flat EDs, the welding process can be accelerated compared with the one without EDs, caused by the concentration of welding energy into the expected welding region and the avoidance of welding edges introduced by surface curvature. Meanwhile, the maximum shear loads of the joints with netlike EDs are higher than those with flat EDs, because of the decrease of the contact area and consequent higher cyclic strain, resulting in more melted materials during the ultrasonic welding process. However, with the increasing of the netlike ED thickness, more porosities are generated in the welding layer leading to reduced bonded region and decrease of the maximum shear load. From the joint fracture morphology analysis, it is found that the netlike EDs introduce carbon fibers in the welding layer, and the fracture modes include fiber-matrix debonding and fiber pull-out in addition to polymer fracture, confirming the feasibility of improving joint quality by introducing CFRP netlike EDs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.