Abstract
In today’s paradigm petroleum and petro-based chemical products are being extracted and consumed at a substantial rate, proving to be hazardous and detrimental to the earth. Bio based resources are environmentally friendly, energy efficient, economical, and proved to be an alternative to the present mineral oils. This paper documents the research on naturally available mahua seed oil for bio-lubrication, its flash point and fire point, tribological properties namely coefficient of friction and wear scar diameter have been modified by the addition of zinc oxide (ZnO) nanoparticles in different concentrations by weight percentage (0.25, 0.50, 0.75, and 1.0). four-ball tester was used according to ASTMD-4172 standards (60 min under 40 kg running at 1200 rpm). Probe ultrasonicator was used for particle dispersion. It was found that 0.75 wt. % loading of ZnO in mahua oil resulted in a 57.14% drop of coefficient of friction, but a slight increase in the wear scar diameter of 30.60% was observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
