Abstract
This paper describes a thermocouple method for measuring the heat flux from the shock-compressed gas in the welding gap to the surfaces of the impacted plates during explosion welding. A set of experiments was conducted to determine the heat flux during explosion welding of copper plates at a distance of 0.4–0.6 m from the beginning of welding. The heat flux from the shock-compressed gas was found to be independent of the contact point velocity in the range of 1800–2500 m/s. As a result, the temperature of surface preheating before collision was found to be quantitatively dependent on the size and material of the welded plates. Thus, the effect of preheating the plates with shock-compressed gas in the gap can be commensurate with the energy released in the weld at the subsequent collision of the plates.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.