Abstract
Self-propagating exothermic reaction (SPER) of alternating metal nanolayers provides intense localised heat that allows bonding of metals or alloys under ambient temperature. However, the formation of the bonds through the rapid heating and cooling confined at the bonding interfaces is a non-equilibrium process, and the thermal effect on solidification and manufacturing reliability is yet to be understood. In this work, the Cu/Sn-nanofoil-Sn/Cu interconnects (where Sn is a solder layer) prepared via SPER of Ni/Al nanofoil are studied by numerical simulations and experiments to understand the thermal transfer and its effect on the solidification. It has been found that the SPER completes within a few milliseconds, the temperature at solder/Cu interface can be higher than the melting point of solder, and the cooling rate can be as high as 1.5 × 107 °C/s, the maximum temperature gradient can reach 5.40 × 107 °C/m. The microstructure predicted by simulation agrees well to the experimental results: the columnar dendrites are formed in the solder during the cooling stage, and the columnar structures prefer to form and grow in the solder region due to the high cooling rate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
