Abstract
Conventional fluids used for heat transfer applications in automobiles limit the performance enhancement and compactness of the heat exchangers. These problems can be overcome by using the technology of nanofluids. The objectives of this work are to prepare nanofluids and to study their dynamic viscosity and thermal conductivity. Chemically treated carbon nanotubes (CNTs) were added with ethylene glycol (EG) and sonicated using a bath sonicator to have a homogeneous dispersion of CNTs in EG. In this study, the nanofluids were prepared with different concentrations of CNTs varying from 0.12 to 0.4 wt%. The dynamic viscosity of nanofluids was measured using a rheometer over a temperature range of 25°C to 60°C. It was observed that the viscosity of nanofluids decreases with an increase of temperature and enhances with CNT concentration. The nanofluid follows the characteristic behavior of Newtonian fluids. A linear rise in thermal conductivity of ethylene glycol was observed with an increase of CNT concentration. It is concluded that EG–CNT nanofluids are promising to meet the challenges required by automobile systems.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
