Abstract
In this paper, thermal conductivity and viscosity of the Al2O3/polyalkylene glycol (PAG) 46 nanolubricants for 0.05 to 1.0% volume concentrations at temperatures of 303.15 to 353.15 K have been investigated. Al2O3 nanoparticles were dispersed in the PAG lubricant by a two step preparation. The measurement of thermal conductivity and viscosity was performed using KD2 Pro Thermal Properties Analyzer and LVDV-III Rheometer, respectively. The results showed that the thermal conductivity of the nanolubricants increased by concentration, but decreased by temperature. Besides, the viscosity of the nanolubricants sharply increased for concentrations higher than 0.3%. However, this parameter diminished by temperature. The highest thermal conductivity and viscosity ratio were observed to be 1.04 and 7.58 times greater than the PAG lubricant for 1.0% and 0.4% concentrations, respectively. As a conclusion, it was recommended to use the Al2O3/PAG nanolubricants with concentration of less than 0.3% for application in automotive air conditioning system.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
