Abstract
The variations in the microstructure and tensile properties of dual-matrix ductile irons have been investigated non-destructively by Magnetic Barkhausen Noise (MBN) method. Specimens have been intercritically austenitised at 795°C and 815°C for 20 minutes, and then oil-quenched to obtain different martensite volume fractions. Two specimens, namely as-cast and oil-quenched from 900°C, were prepared for comparison purpose. To investigate the effect of tempering, some specimens were tempered at 500°C for 1 h and 3 h. The results showed that there is a good correlation between MBN response and variations in microstructure and mechanical properties. The volume fraction of martensite can be controlled to modify the mechanical properties, and all changes in the microstructure can be nondestructively monitored by MBN.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
