Investigation of the use of aluminum oxide nanoparticle-enhanced waste cooking oil blends in compression ignition engines.

Abstract

The sustainable utilization of waste cooking oil (WCO) as an alternative to fossil fuels has gained considerable attention due to its potential for delivering substantial environmental and economic benefits. This research attempts to explore the impact of incorporating aluminum oxide nanoparticles (AONP) into WCO on the emissions, combustion characteristics, and overall performance of a single-cylinder compression ignition (CI) engine. Comparative analyses were conducted against conventional commercial diesel fuel and pure WCO, as well as varying blends of WCO with AONP at 25ppm, 50ppm, and 75ppm concentrations. The experimental results demonstrate a notable enhancement in brake thermal efficiency (BTE), with a 13.2% increase observed in the WCO + 75 AONP fuel blend compared to neat WCO. Engines fueled by WCO nanoparticle blends showed significant augmentation in-cylinder pressure and heat release rates. Furthermore, these blends exhibited a substantial reduction in carbon monoxide (CO), hydrocarbons (HC), and soot emissions by 44%, 31%, and 48%, respectively, while nitrogen oxide (NO) emissions increased by 7% compared to neat WCO. Among the assessed fuel mixtures, the WCO + 75 AONP blend demonstrated higher engine performance. This study underscores the potential of aluminum oxide nanoparticle-enhanced WCO blends as viable and environmentally responsible options for sustainable energy solutions. However, challenges such as production costs and long-term fuel stability must be addressed to establish nano-fuels as financially viable alternatives.