Investigation of the Role of K2SO4 Electrolyte in Hole Transport Layer for Efficient Quasi-2D Perovskite Light-Emitting Diodes.

Abstract

Quasi-two-dimensional (2D) perovskite light-emitting diodes are promising light sources for color display and lighting. However, poor carrier injection and transport between the bottom hole transport layer (HTL) and perovskite limit the device performance. Here we demonstrate a simple and effective way to modify the HTL for enhancing the performance of perovskite light-emitting diodes (PeLEDs). An electrolyte K2SO4 is used to mix with poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) as the hole transport layer. The K+ doping helped the quasi-2D perovskite phases grow vertically along the interface of the PEDOT:PSS, fine-modulate the phase distribution, and simultaneously reduce the defect density of quasi-2D perovskites. It also significantly reduced the exciton quenching and injection barrier at PEDOT:PSS and quasi-2D perovskite interface. The optimized green PeLEDs with the K2SO4 doped PEDOT:PSS HTL showed a maximum luminance of 17185 cd/m2 which is almost 4.7 times brighter than the control one, with a maximum external quantum efficiency of 18.64%.