Abstract
To determine the duration of the heat treatment process on the heating medium (water)To determine the duration of the heat treatment process on the heating medium (water) temperature and layer thickness of the original sample using sous-vide technology, a chicken fillet was selected. The following diagrams were plotted and analyzed: temperature in the chicken fillet specimen as a function of duration of heat treatment process at heating medium (water) temperatures of 60, 70 and 80?C; temperature in the chicken fillet specimen as a function of duration of heat treatment process at thickness of 0.5; 1; 2 cm. Recommendations are given for choosing the optimum temperature regime and thickness of the layer of chicken fillets for cooking by sous-vide technology. At a temperature of water in the thermostat working chamber of 60? C can not be reached inside the sample of product to a temperature of 68-70 ? C, even after 5 minutes of exposure, so there is a possibility of harmful micro-organisms in the finished product. At a temperature of water in the thermostat working chamber of 80 ? C is intense heating of chicken fillets to a temperature of readiness, but the product remains raw because of the short duration of the process, with a further curing the product is heated to a higher temperature of 78-79 ? C, which reduces the quality of the finished product. Optimal selected heating medium temperature (water) in the working chamber of thermostat-70 ?C, which is in the range of recommended regulatory documentation temperatures. At this temperature, the product achieves the necessary cooking temperature of 68-70 ?C, and the duration of heat treatment is reduced by 2.9 times, energy consumption is reduced by 2 times and a high degree of readiness of the product is cooked.
Highlights
В литературе [9, 12] в качестве режимных параметров для приготовления филе куриного по технологии sous-vide дана температура греющей среды и продолжительность процесса, которые представлены в широком диапазоне, что не позволяет проводить процесс с получением продукта высокого качества при оптимальном расходовании энергии
To determine the duration of the heat treatment process on the heating mediumTo determine the duration of the heat treatment process on the heating medium temperature and layer thickness of the original sample using sous-vide technology, a chicken fillet was selected
Recommendations are given for choosing the optimum temperature regime and thickness of the layer of chicken fillets for cooking by sous-vide technology
Summary
Koroleva E.I., Davydov A.M., Nikulina E.N., Derkanosova A.A. Исследование процесса приготовления филе куриного по Investigation of the process of cooking chicken fillet using sous-vide технологии sous-vide (су-вид) //Вестник ВГУИТ. Sous-vide (су-вид) – это технология низкотемпературной тепловой обработки сырья, Длина и ширина поверхности 7 см. Рекомендации в Таблице времени и температур sous-vide [9] устанавливают два параметра полной кулинарной готовности филе куриного: температуру в центре продукта и продолжительность выдержки продукта при этой температуре. В литературе [9, 12] в качестве режимных параметров для приготовления филе куриного по технологии sous-vide (су-вид) дана температура греющей среды (воды) и продолжительность процесса, которые представлены в широком диапазоне (температура воды 60–71 oС, продолжительность 30–90 минут), что не позволяет проводить процесс с получением продукта высокого качества при оптимальном расходовании энергии
Sign-in/Register to view highlights & summary 
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Proceedings of the Voronezh State University of Engineering Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
