Investigation of the mechanical properties of concrete incorporating recycled rubber particles

Abstract

Quantity of waste rubber generated by automobile tires is growing, posing an environmental threat. Rubber tire recycling was studied for usage in asphalt and waterproofing systems during past few decades. Globally, concrete is the most widely used building material. About 7% of CO2 emissions come from the cement production. The purpose of this research is to assess if using waste rubber and Portland cement together in composite material for structural applications is feasible. Waste tires (shredded to 0/1 mm) were used as fine aggregate replacement (in 2.5 and 7.5 %), together with PC and natural stone. An investigation of properties in fresh (slump test, bulk density, air content) and hardened state (bulk density, compressive strength) was performed on the rubberized concrete. The compressive strength decreased by increasing the rubber content for all w/c ratios (0.55-0.4). The addition of fine-sized rubber did not cause a retardation in cement hydration mechanism. According to the obtained compressive strengths, all designed rubberized concretes belong to a group of structural concretes.