Investigation of the Matching Relation Between Impeller and Flow Channel of Regenerative Flow Pumps

Abstract

Abstract As a specific radial flow pump, the regenerative flow pump (RFP) usually has a low efficiency. In this study, in order to explore the matching mechanism, three cases with various matching relations were investigated by the methods of theoretical calculation, computational fluids dynamics (CFD) simulation, and experiment test. The results illustrate that the theoretical prediction, numerical simulation, and experimental data are in good agreement. Furthermore, when the matching relation expressed by a ratio of the channel's and blade's radial length is equal to 1, the geometrical profiles of RFP can well guide the circulation flow into the channel at large radii and into the impeller at small radii, forming intense longitudinal vortex. The steady, strong exchange flow is characterized by the inflow and outflow regions approximately half of the isosurface. The axial vortex motion without apparent flow separation and irregular flow is observed in the impeller, a low velocity annulus exists in the medium radii of the impeller without other distinct velocity clouds, and a low velocity strip and a high velocity annulus in the channel are, respectively, performed along the blade's pressure surface and the channel's outer radii. All of this corresponds to the best pump's performance and the largest efficiency of the impeller and channel. This work promotes a systematical understanding of the matching mechanism between impeller and flow channel in the RFP and could provide some reference for the design and performance optimization for RFP.