Investigation of the Interface Strength of Hydroxyapatite Coating by the LASAT (Laser Shock Adhesion Test) Method

Abstract

Abstract A good adhesion of plasma sprayed hydroxyapatite (HA) coating on Ti-based alloy is crucial for ensuring highly-reliable non cemented implants in the biomedical industry. In the present work, the laser shock adhesion test, namely LASAT, has been applied to investigate the interface strength of plasma sprayed HA coatings. This contact less method allowed a rapid assessment of the HA coating adhesion on simple coated plates. Varying the laser energy to impact the substrate and to generate the interface decohesion, a LASAT adhesion threshold can be determined for the highest laser fluence (J/m²) for which no debonding of the coating occurred. This qualitative and discerning LASAT procedure has been carried out on HA coatings to investigate the role of various interfaces on the adhesive property of the HA/Ti bond. According to the LASAT analysis, a surface roughness prepared with medium or coarse grit-blasting did not influence drastically the adhesion threshold while smooth pre-oxidized specimens LASAT threshold were near to those obtained with a Ti bond-coat. These thresholds also corresponded with the highest adhesion measured in this study. In addition, pre-heating treatment of substrates just prior to spraying up to 270°C did not exhibit a significant difference with grit-blasted HA/Ti interface. Further investigations (SEM, XRD) was also achieved to investigate the interface characteristics before and after the laser treatment. Sample cross-sections of laser shocked specimens were examined in detail, right at the impact location and within the debonding area to assess the fracture feature. This complementary materials analysis permitted to establish the relevance of the LASAT test as a fast and easy-to-use method devoted to the design or the control of highly adhesive HA coatings. Preliminary experiments to apply the LASAT method in liquid environment is described. Further work is on progress to implement an in situ adhesion testing of HA coating in simulated body fluid.