Abstract
In this work, the arsenic (As2O3) amount in colemanite ore was reduced from 4551 to 425 ppm using decrepitation. The crystal and amorphous states of products were determined by XRD measurements and the thermodynamic properties of samples were examined by DSC-TGA analysis. Elemental arsenic was analyzed using an ICP-ES/MS analyzer. As a result of the characterizations, a majority of the arsenic mass was found in the waste material for all temperatures. It was concluded that arsenic is carried on the surface of gangue minerals in the calcination process. Moreover, the decrepitated arsenic compounds tend to accumulate back on solid surfaces thus the amount of arsenic was found to be higher than the amount found in literature which is lower than 100 ppm. Therefore the affinity of arsenic compounds to montmorillonite and colemanite surfaces were further studied comparatively using molecular dynamics (MD) and Monte Carlo (MC) simulations. The resulting energy and density profiles show that the arsenic compounds have a higher affinity towards the montmorillonite surface. The simulation results reflect the decrease of accumulation amount on the surfaces with increasing temperature in parallel with the experimental measurements.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.