Investigation of the influence of various process parameters on the radial forging processes by the finite element method (FEM)

Abstract

In this study, the finite deformation theory was used to develop a large rigid-plastic deformation finite element program which could simulate the radial forging process of work-hardening materials. First, experiments were carried out to confirm the accuracy of the program. Then we investigated the influence of each parameter on the forging process. The parameters adopted in this study are die corner radius (R), ring gap height (H), friction factor (m), and work-hardening coefficient (n). The effects of parameters on the flange thickness ratio (h/H) and the outer protruding shape ratio (D/D0) are also obtained.