Abstract
BackgroundLarge-scale application in solar salt-water splitting is an important way to reduce the influence of environmental problem without any decrease in the usage of energy. To develop the photoelectrochemical (PEC) salt-water splitting is thus a promising way for further industrial application. MethodsThe Ag2ZnSnSe4 (AZTSe) and their S-ions incorporating samples were produced by the post selenization/sulfurization of Ag/Sn/Zn sandwich metal precursors with the suitable amount of sulfur + selenium powder mixtures at 410 ℃ for 90 min under nitrogen atmosphere. The PEC tests using samples as photoelectrode were then carried out. Significant findingsThe maximum light-enhanced activity of pristine AZTSe and their S-ions incorporated samples was 3.65 and 2.37 mA/cm2 as the applied voltage of 1.23 V vs. RHE (relative hydrogen electrode) in a 0.5 M sodium chloride electrolyte, respectively. Electrochemical impedance and intensity-modulated photocurrent spectra of samples represented that the S-ions incorporated into AZTSe sample could reduce the photo-corrosion reaction on sample surface because of the decrease in the number of light-induced holes occupied on sample surface. Our report proposed the systemic evaluation on the influence of S-ions incorporated into AZTSe sample for light-enhanced salt-water splitting.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of the Taiwan Institute of Chemical Engineers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
